Xerox 6110MFP/XN Service Documentation page 173

Alignment and Adjustmens
Mamual tray
1. Pull the tray 1 out.
2. Push the manual tray tab down.
3. Pull the Jammed paper out of the manual tray.
4. Insert the tray 1 into the machine until it snaps
into place. Printing automatically resumes.
6-8
Print exit area
1. Open and close the front cover. The jammed
paper is automatically ejected from the
machine.
2. Gently pull the paper out of the output tray.
If you do not see the jammed paper or if there
is any resistance when you pull, stop and go to
the next step.
3. Open the rear cover.
4. If you see the jammed paper, pull it straight up.
Skip to step 8.
If you still do not see the paper, go to the next
step.