Xerox 6110MFP/XN Service Documentation page 41

4 Disassembly Procedure
4.3 LSU
WARNING: Observe safe working
practices. Click Warnings/Cautions for
Safety button on Repairs and Adjustments
menu if unsure about safe working
practices.
1. Remove Imager Unit and ITB, 4.10
CAUTION: Protect Imager Unit and ITB
from light.
2. Remove LSU Cover by grasping sides
of cover and lifting.
care when moving cover past
connector (red
3. Disconnect left electrical plug, remove
Screws (3) and lift LSU enough to
access and disconnect right side
electrical plug (CAUTION: Hold small
PWB while disconnecting plug, red
arrow) and remove LSU.
CAUTION: Use
arrow).
Replacement
CAUTION: Ensure ground wires (red
arrows) are secured.