Setting And Calling A Preset - Revo RU8NVR2AX User Manual

Setting and Calling a Preset

A preset position (preset for short), is a saved view used to quickly steer
the PTZ camera to a specific position. A preset consists of the following
settings: pan and tilt positions, zoom, focus, and iris.
1. Access the PTZ Management window. For the detailed steps, see
PTZ Control Window and PTZ Management
2. Add presets.
a.
b.
c.
d.
3. To call a preset, click
rotates to the preset position.
Click the directional buttons to steer the PTZ camera to the
desired position.
Adjust the zoom, focus, and iris as needed.
Select a preset number not in use, and then click
Repeat the above steps to add all the presets.
for the corresponding number. The camera
42
Window.
under Edit.