Revo RU8NVR2AX User Manual page 59

NOTE!
The default schedule is 24×7 and you may change it as needed. Up to 8

different periods for each day are allowed. Time periods cannot overlap.
To apply the same arming schedule to other days, select the intended

day(s) right to Copy To.
To apply the same settings to other cameras, click Copy and select the

desired camera(s).
Click Apply to save the settings.
Motion Detection
When enabled, a motion detection alarm occurs if an object inside the
detection area moves to certain extent, and an alarm icon appears in the
upper right corner.
Motion detection is enabled on the NVR by default. Unless modified, the
detection area covers the full screen, and recording is triggered only for
the current camera. The settings remain if you disable motion detection
and then enable it.
Click Alarm > Motion.
Select the desired camera and then select Enable to enable motion
detection.
Use the mouse to draw a detection area, and drag the slider to set
detection sensitivity, target object size, and duration. The higher the
sensitivity, the more likely a moving object will be detected.
59