Revo RU8NVR2AX User Manual page 96

Camera Side Analysis
Cameras that support smart intrusion prevention (SIP) can detect cross
line behaviors for motor vehicles, non-motor vehicles, and pedestrians.
NOTE!
Make sure the intelligent server of the camera is enabled by default

and the platform communication type is in LAPI mode before
connecting the camera.
Configure cross line detection.
a. Click VCA > VCA Config. Click
to configure the parameters.
b. Select a camera added by REVO protocol, and select the Enable
check box.
c. Click
d. Set the parameters.
Item
Sensitivity
to draw a line in the left preview window.
The higher the sensitivity, the more likely cross line
behaviors will be detected, and the more likely false
alarms will occur. The default value is 50. You may
96
right to Cross Line Detection
Description