Revo RU8NVR2AX User Manual page 109

Use the NVR to detect cross line behaviors for motor vehicles, non-motor
vehicles, and pedestrians.
The operation steps are basically the same as those of camera side
analysis, and some of the different steps are explained in the following.
Configure enter area detection.
Item
Sensitivity
Priority
Object Type
Filter Type
View captured snapshots in real time.
To preview the captured snapshots, select Preview Mode > Smart. The
snapshot in the preview page is displayed as follows.

The captured snapshot displayed on the right side is the original
image, not the clipped thumbnail image.

The detailed information about thumbnail images only includes
event type (enter area detection) and capture time, and not
includes object type (motor vehicles, non-motorized vehicles,
pedestrians) and channel number.
Leave Area Detection
Leave area detection is used to detect and capture objects leaving
specified area(s).
Description
See Camera Side
Set the priority when there are several rules. The rule
with high priority will be detected preferentially.
Object type includes motor vehicle, non-motor vehicle,
and pedestrian.
See Camera Side
109
Analysis.
Analysis.