Table of Contents
Advertisement
Email
After Email is enabled as a triggered action (in Trigger Actions windows)
and configured properly, the NVR sends an email notification to specified
email address(es) if an alarm occurs within the time period(s) set in the
arming schedule. The email contains basic alarm information such as
alarm type, alarm time, camera ID, and camera name, etc.
Before using this function, make sure the NVR has a functional connection
to an SMTP server with which you have a valid email account. Depending
on the intended recipients, a connection to the Internet may be required.
Only certain NVR models support this function.
Click Network > Basic > Email.
Configure the related parameters. If server authentication is
required, you need to enter the correct username and password.
Click Test to send a test email. Enter a valid SMTP server address and
port number, and then select Enable TLS/SSL if required.
114
Advertisement
Table of Contents
