Motion Detection - Revo RU8NVR2AX User Manual

Motion Detection

When enabled, a motion detection alarm occurs if an object inside the
detection area moves to certain extent, and an alarm icon appears in the
upper right corner.
Motion detection is enabled on the NVR by default. Unless modified, the
detection area covers the full screen, and recording is triggered only for
the current camera. The settings remain if you disable motion detection
and then enable it.
Click Alarm > Motion.
Select the desired camera and then select Enable to enable motion
detection.
Use the mouse to draw a detection area, and drag the slider to set
detection sensitivity, target object size, and duration. The higher the
sensitivity, the more likely a moving object will be detected.
Click
more details, see
NOTE!
The number of cameras that can be connected may vary with NVR model.

Actions that can be triggered may vary with alarm type.

right to Trigger Actions and set action(s) to trigger. For
Alarm-Triggered Actions.
85