Revo RU8NVR2AX User Manual page 134

View test results.
The system will automatically pack the data when the test ends or test
duration is up. You can view the packet loss rate and network latency of
the current camera in a chart.
To capture and save packets, select the USB storage device, specify
the port number and IP address, and then click
desired NIC. The captured packets are saved as a backup file in the
root directory of the USB storage device. You may click Open to view
the file.
Export test results.
NOTE!
The packet size is 1520 byes by default and can be changed as

needed.
The backup file of the captured packets is named in NIC

name_time.pcap format.
Packets cannot be captured if it is already started on the Web

interface.
If you use PPPoE, a virtual NIC will appear in the list after the dial-

up succeeds, and you may capture packets sent to and from this
NIC.
Network Settings
Click Maintain > Network Info > Network to view network settings.
Click Export to the Backup page.
Select a partition and export format. Click Backup to export
the network test results to the USB storage device.
134
right to the