Time Configuration - Revo RU8NVR2AX User Manual

Click Apply to save the settings.

Time Configuration

Time
Click System > Time > Time.
Select the correct time zone, and then set date and time formats and
the system time. The following shows an example.
To use Network Time Protocol (NTP), enable auto update, set the
address and port number of the NTP server, and the update interval.
Click Apply to save the settings.
DST
Click System > Time > DST.
Enable DST by selecting the check box, and then set the start time,
end time, and DST bias correctly.
Click Apply to save the settings.
126