Table of Contents
Advertisement
Operating the appliance
en
If the burner's flame accidentally goes out, switch off the
burner's selector and wait at least one minute before
igniting the burner again.
If the flame goes out
Switch off the control knob. Wait one minute and switch
the burner on again.
:
Warning – Risk of fire!
If the flame goes out, gas will escape. Never leave the
gas burner unattended during operation. Ensure that
there are no draughts.
Switching off the oven gas burner
Turn the selector to the
Operating the grill
Keep the appliance door closed while you are
Note:
using the grill function.
Open the oven door.
1.
Press and hold the selector for the grill and turn it to
2.
the "
—
" position.
The gas burner ignites.
Press and hold the selector for a few seconds until
3.
the flame stabilises.
Turn the selector for the grill to the required grill
4.
setting.
Position
Meaning
Small flame, lowest setting
˜
Large flame, highest setting
—
The flame is not stable between positions
Note:
and "
". Always select a position between "
—
"
˜
".
Close the oven door carefully.
5.
Do not press the ignitor for longer than 15 seconds. If
the burner does not ignite within 15 seconds, wait at
least one minute before repeating the procedure.
If the burner's flame accidentally goes out, switch off the
burner's selector and wait at least one minute before
igniting the burner again.
If the flame goes out
Switch off the control knob. Wait one minute and switch
the burner on again.
:
Warning – Risk of fire!
If the flame goes out, gas will escape. Never leave the
gas burner unattended during operation. Ensure that
there are no draughts.
Switching off the grill
Turn the control knob to the
20
position.
Û
—
position.
Û
Setting hybrid mode
You can use the function selector to easily set your
oven. Here we explain the settings for the hybrid mode.
Setting the type of heating and temperature
You can use the function selector to easily set the
appliance.
While the oven selector is switched on, set the function
selector to hybrid mode and the hybrid mode starts.
To ensure that the hybrid mode can start, switch
Note:
on the oven selector.
You can use the oven selector to set the temperature
for the hybrid mode.
Switching off hybrid mode
Set the function selector to the
another function.
Using combination mode
The temperature range marked on the selector
Note:
for the oven applies only when using conventional
heating. In combination mode, the temperature in the
oven is higher than the temperature that has been set.
Switching on combination mode
Open the top cover of the appliance.
1.
Open the oven door.
2.
Press and hold the selector for the oven and turn to
3.
the required temperature.
Û
The oven gas burner ignites. Press and hold the
" and
selector for a few seconds until the flame stabilises.
Press and hold the selector for the grill and turn it to
4.
the "
—
The grill gas burner ignites. Press and hold the
selector for a few seconds until the flame stabilises.
Close the oven door carefully.
5.
Set the required temperature using the selector for
6.
the grill and oven.
Caution!
If the grill and oven gas burners are operating at the
same time (combination mode); when cooking with
water, the grill gas burner may go out due to the air
circulation.
Notes
If the gas burner does not ignite within 15 seconds,
■
stop attempting to ignite the flame, open the oven
door and wait for 60 seconds.
If the flame inadvertently goes out, turn the selector
■
to the "
Switching off combination mode
Turn the selector for the grill and oven to
Û
" position.
" position and wait for 60 seconds.
Û
position or set it to
.
Û
Advertisement
Table of Contents
