Table of Contents
Advertisement
AChildproof lock
Y our appliance is equipped with a childproof lock so
C h i l d p r o o f l o c k
that children cannot switch it on accidentally or change
any settings.
Notes
You can go to the basic settings to specify whether
■
you want the option to set the childproof lock.
~ "Basic settings" on page 23
If a hob is connected, it will not be affected by the
■
childproof lock on the oven.
After a power cut, the childproof lock will no longer
■
be active.
The childproof lock only monitors the time-setting
options and the timer functions on the clock. The other
functions on your appliance are not affected.
Activating and deactivating
Press and hold the
D
The symbol for this function appears in the display. The
childproof lock is now active.
If a timer duration
Note:
to count down. While the childproof lock is active, the
timer duration cannot be changed.
To deactivate the function, proceed as follows: Press
and hold the
D
button for four seconds until the
symbol goes out in the display.
button for approx. four seconds.
t
has been set, this continues
QBasic settings
T here are various settings available to you in order to
B a s i c s e t t i n g s
help use your appliance effectively and simply. You can
change these settings as required.
List of basic settings
Depending on the features of your appliance, not all
basic settings will be available.
Basic setting
Clock display
™‹
Signal duration upon com-
™‚
pletion of a cooking time or
timer period
Acoustic signal when a but-
™ƒ
ton is pressed
Waiting time until a setting
™„
is adopted.
You can activate the button
™...
lock.
* Factory setting (factory settings may vary depending on the appli-
ance type)
--------
Changing the basic settings
The function selector is set to the "Off" position.
Press and hold
for approx. 4 seconds.
v
1.
The first basic setting appears in the display,
e.g.
™‹ ‚
.
If required, use
or
A
2.
Press
to confirm.
v
3.
The next basic setting appears in the display.
Use
to scroll through all of the basic settings and,
v
4.
if required, use
or
A
settings.
Press
again to confirm. Press and hold for
v
5.
4 seconds.
This applies all the basic settings.
You can change the basic settings again at any time.
Following a power failure, the factory basic
Note:
settings are restored.
Childproof lock
Selection
‹
= hide the clock
‚
= display the time*
‚
= approx. 10 seconds
ƒ
= approx. 30 seconds*
„
= approx. 2 minutes
‹
= Off
‚
= On*
‚
= approx. 3 seconds*
ƒ
= approx. 6 seconds
„
= approx. 10 seconds
‹
= No
‚
= Yes*
to change the setting.
@
to change any of these
@
en
23
Advertisement
Table of Contents
