Table of Contents
Advertisement
Time-setting options
en
OTime-setting options
Y our appliance has different time-setting options.
T i m e - s e t t i n g o p t i o n s
Time-setting option Use
Timer
The timer functions like an egg timer. It runs
t
independently of the appliance when it is in
operation and of other time-setting options,
and does not affect the appliance.
Time
When no other function is running in the fore-
v
ground, the appliance shows you the time of
day in the display.
A signal sounds once the timer duration has elapsed.
You can cancel the audible signal early by tapping the
button.
v
You can change how long the audible signal
Note:
sounds for in the basic settings.
Setting the timer
The timer runs alongside other settings. You can set it
at any time, even if the appliance is switched off. It has
its own audible signal so that you can tell whether it is
the timer or a cooking time which has elapsed.
You can set a duration of up to 23 hours 59 minutes.
Up to 10 minutes, the timer duration can be set in 30-
second increments. Above 10 minutes, the time
increments become longer the higher the value.
The timer duration starts at a different default value,
depending on which button you tap first:
5 minutes if you tap the
tap the
button.
@
Tap the
button until the timer symbol
v
1.
highlighted.
Use the
or
button to set the timer duration.
A
@
2.
After a few seconds, the timer duration will start to
count down.
The timer duration has elapsed
An audible signal will sound. The timer duration will be
zero on the display.
Touch any button to switch off the timer.
Changing and cancelling
You can use the
or
A
@
duration at any time. After a few seconds, the change
will be applied.
To cancel, use the
button to reset the timer duration
A
all the way to zero. The timer is now switched off.
22
button and 10 minutes if you
A
is
t
button to change the timer
Setting the time
Once the appliance has been connected to the mains
or following a power failure, the clock will flash on the
display. Set the time.
The function selector must be set to the "Off" position.
Use the
or
button to set the time.
A
@
1.
The time will stop flashing.
Confirm by pressing the
2.
The appliance will apply the time you have set.
You can go to the basic settings to specify
Note:
whether or not the time should be shown on the display.
~ "Basic settings" on page 23
Changing the time
You can change the time again when you need to, e.g.
from summer to winter time.
To do this, when the appliance is switched off, touch the
button until the symbol for the time is underlined,
v
and use the
or
button to change the time.
A
@
v
button.
Advertisement
Table of Contents
