Clearing The Settings In Memory - Panasonic KX-TCD953EB Operating Instructions Manual

Clearing the Settings in Memory

This function enables the handset or base unit to clear the following settings at one time. They will
return to their initial settings.
On the handset
Function
Base unit access
Key tones
Handset ringer volume
Handset ringer pattern
Call waiting tone
Range warning alarm
Battery low alarm
Stand-by mode display
Talk mode display
Call prohibition
Direct call mode
Direct call number
Handset password
Handset receiver volume
Redial memory
Auto talk
1
Press PROG .
Press G or F until " F0 " is displayed,
2
then press .
OK
3
Enter the handset password (p. 33).
- - - - - - - - - - - -
4
Press .
PROG
A confirmation tone sounds and the
display will return to the stand-by mode.
Initial setting
Automatic base
unit access
ON
3 (MEDIUM)
1
ON
OFF
ON
Base unit number
Length of the call
OFF
OFF
Clear
0000
MEDIUM
All clear
OFF
On the base unit
Function
Bell selection
Earth/time break recall
Pause timing
Call restricted handset(s) All clear
Call restriction number(s) All clear
Base unit password
Base unit ringer volume
Base unit ringer pattern
Key tones
1
Press then
PROG
2
0
Press .
3
Enter the base unit password (p. 33).
- - - - - - - - - - - -
4
Press .
PROG
A confirmation tone sounds and the
display will return to the stand-by mode.
Initial setting
All handsets
Time break recall
3 seconds
0000
2 (MEDIUM)
1
ON
INT
.
39