Salicru EQUINOX EQX2 4002-T User Manual page 42

10. ANNEX. WIFI MODULE SETUP.
The WiFi module must configured in the router during the first
installation process. If the name or password of the router is
changed, the WiFi password must be configured again.
1.
WiFi module setup.
a.
Start the inverter.
b.
Prepare a laptop computer or smartphone and activate the
WLAN/WiFi connection.
c.
Go to screen 10.2.2 SSID to identify the WiFi network name
of the Inverter.
d.
On the laptop or smartphone, search for the WiFi with the
name "WiFi-AP********" and select it to connect.
2.
Open the browser and type the address 10.10.100.254. The
following screen will be displayed, enter the user name
"admin", password "admin" and click on "Login". See Fig. 48.
Fig. 48. User login.
3.
The "System" interface will open. See Fig. 30.
(1) The * correspond to the last 8 digits of the inverter's S/N.
Fig. 49. Interface system.
88
4.
Click on "STA Setting" to open the Interface Wi-Fi setup. If this
is the first time entering the system, the screen on Fig. 31 will
be shown.
Fig. 50. WiFi setup interface.
However, if it has been previously configured, the screen
shown in Fig. 32 will appear. Click on "Scan" to display a list of
available WiFi networks.
Fig. 51. WiFi setup interface.
WIFI-AP******** (1)
5.
Select the desired WiFi and click on "OK". It only supports
2.412GHz-2.484GHz routers. See Fig. 52.
Fig. 52. Selecting the WiFi network.
SSID_router_instalacion
SSID_red_vecino_1
94:83:C4:03:1:A4 21
SSID_red_tienda_1 1
B3:F2:67:A5:21:A1
SSID_router_instalación C6:B4:C6:8:44:6 6
SSID_red_tienda_2 A6:BD:36:F8:C4:3 11
D3:FC:21:F8:35:1 4
SSID_red_vecino_3
SSID_red_tienda_3 43:87:05:C2:4:18 1
SALICRU