Salicru EQUINOX EQX2 4002-T User Manual page 33

If you do not have a camera or it does not detect the
barcode correctly, type the serial number marked with
a red box in the indicated field.
c.
Press the "Next" button.
When adding the device, two situations can occur:
1 : The device is added successfully. This is indicated with
the following message:
2: The device you are trying to add is already registered.
This is indicated with the following message:
USER MANUAL
3.
Device connection.
Once the dongle has been paired to the corresponding plant,
you have to configure the WiFi network of the installation to
which it has to connect to access the server and update the
application data.
Follow the steps shown in the application or in the annex
(section 11) of this manual.
EQX2 SOLAR INVERTERS CONNECTED TO THE GRID
79