Salicru EQUINOX EQX2 4002-T User Manual page 12

4.3. SCREEN INTERFACE AND WIFI
MODULE.

Fig. 14. Synoptic chart view.
Indicator Item

On indicator

OLED display

Button





Alarm
indicator





Tab. 5. Synoptic chart elements and WiFi module.
58



Status
Off No voltage detection or input voltage too low.
Slow flash Inverter On, waiting for grid connection.
Fast flash Grid detected. Self-test mode.
On Normal, connected to the grid and generating energy.
On Displays inverter operation information.
If there is no response when pressing the button, the screen is
Off
faulty or not connected properly.
Change the information on the OLED screen and set the
(Physical)
parameters with a short press and long press.
The communication between the inverter and the server is normal.
On
However, the inverter reports an error.
The WiFi module is not properly connected to the inverter's
"Com" port. The WiFi module is restored.
Off
Changed router or password. The WiFi signal is too weak at the
place of installation.
Slow flash
The WiFi module is not connected to the router.
Off
Fast flash
The WiFi module connects to the router, but not to the server
On
Off
Communication between inverter and server is normal.
On

Fig. 15. Wi-Fi module view.
Description Solution
Check the guide for more information about common faults
and troubleshooting.
Check if the WiFi module is connected properly to the inverter.
Remove and insert the Smart Dongle; Restart the inverter.
Remove and insert the Smart Dongle; configure the WiFi module,
move the router closer to the inverter. Register the user account.
1. Remove and insert the WiFi module.
2. Reload WIFI3. Configure the WiFi module again.
Check that the router has an Internet connection.
Check that the firewall is not blocking port 5743.
Communication is normal.
SALICRU