Salicru EQUINOX EQX2 4002-T User Manual page 32

In the drop-down menu, click on the "Devices" button.
The "Devices" panel will appear. The devices assigned to the
plant will appear in this panel.
To add the device (485/WiFi EQX2) communication module to the
plant, press the "add" button
Next, select the 485/WiFi EQX2 device to start the pairing process.
78
[ + ]
to the right of "Devices".
The pairing process has 3 steps:
1.
Connect the dongle:
a.
Make sure that the dongle is plugged into the unit's
USB port.
b.
Press the "Next" button.
2.
Add device
You must link the inverter's serial number to add the unit to
the plant.
a.
Press the "Scan" button.
The smartphone or tablet may request
permission to use the camera. Permission
is required.
b.
Move the camera closer to the barcode that appears on the
inverter label. When the code is detected, the scanner will
close and the serial number will be written automatically.
Check that the serial number corresponds to the one on
the label.
Code: 6B2AB000027
S/N 531522B00012
SERIES: EQX2 3001-8002-HSX
Fig. 47. Example of a barcode identification label.
SALICRU