Isp Header Selection Chart (By Device) - Equinox Systems EPSILON5 MKII User Manual

Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of EPSILON5-A1 - ISP PORTABLE PROGRAMMER USB
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com

4.3 ISP Header Selection Chart (by Device)

The table below details which header to choose for a specified device or device family. The
information contained in this manual does NOT show the actual connections to the Target
Microcontroller. Please refer to the separate Application Notes ( see App Note column in table below )
for full details of how to implement In-System Programming for your selected device.
Please note:
•
The Atmel ATmega323/128/64 devices can be programmed via 'LV SPI' or 'JTAG' by
connecting the relevant header to the SPI or JTAG port of the device.
•
The header J6 is multi-functional. The pin-out of this header is different depending on which
device type is being programmed.
# Device Family
1 Atmel AT89S
2 Atmel AT90S (AVR)
3 Atmel ATmega (AVR)
4 Atmel ATmega (AVR)
5 Atmel ATtiny (Low Voltage)
6 Atmel ATtiny (High Voltage)
7 Atmel W&uC (Temic)
T89C51Rx2
8 Philips P89C51Rx2
9 Philips P89C66x
10 Zensys Z-Wave
60
Devices
AT89(L)S51/52/53/8252
All AT90S ISP devices
All ATmega devices
ATmega323/128/64
All ATtiny ISP devices
ATtiny11/12/15L
T89CRB2/RC2/RD2
P89CRB2/RC2/RD2
P89C662/4/8
ZW0102, ZW0201
EPSILON5 MKII Programmer - User Guide V1.12 – 1
Algorithm Header Sect.
LV SPI J6(a) 4.4, 4.5
J7 4.8
LV SPI J6(a) 4.4, 4.5
J7 4.8
LV SPI J6(a) 4.4, 4.5
J7 4.8
JTAG J8 4.9
LV SPI J6(a) 4.4, 4.5
J7 4.8
HV SPI J6(b) 4.6
UART J6(c) 4.7
Boot
Loader
UART J6(c) 4.7
Boot
Loader
UART J6(c) 4.7
Boot
Loader
LV SPI J6(a) 4.5
App
Note
AN103
AN100
AN101
AN105
AN104
AN104
AN106
AN106
AN107
AN106
AN107
See
Zensy
App
Note
st
August 2007