Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of EPSILON5-A1 - ISP PORTABLE PROGRAMMER USB
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com
5
PROG_RESET O
6
PROG_GND
P
Key
O - Output from programmer to Target Device
I - Input to programmer from Target Device
P - Passive eg. GROUND and power rails
N/C - Not connected
62
RESET
Target RESET control pin
This pin controls the Target Device
RESET pin. It will driven HIGH/LOW
according to the device type and settings
in the 'Pre-program State Machine' tab in
the Eqtools project.
GROUND
Ground Connection
Common ground connection between
PROGRAMMER and Target System.
EPSILON5 MKII Programmer - User Guide V1.12 – 1
st
August 2007