Table of Contents
Advertisement
Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of EPSILON5-A1 - ISP PORTABLE PROGRAMMER USB
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com
6a. Programming operation has FAILED !
6b. To clear the ERROR CONDITION:
Press
6c. To re-program the same Target System
Go to step 4.
6d. To program a new Target System after a
FAILURE:
i.
Disconnect ISP Cable from Target
system
ii.
Go to step 3
7a. Programming operation has PASSED.
7b. To program a new Target System:
i.
Press the
once
ii.
Go to step 3
EPSILON5 MKII Programmer - User Guide V1.12 – 1
outputs connected to the
Target System
'Standby' mode again
key once
outputs to connect to Target
system
released (target code may
start to execute)
'Waiting State' ready to start
an 'Autoprogram' operation.
button
st
August 2007
FAIL LED flashes
Programmer tri-states all
FAIL LED goes out
Programmer is in
<PASS> LED flashes
Programmer tri-states all
Target System RESET is
<PASS> LED goes out
Programmer is now in the
47
Advertisement
Table of Contents
