Table of Contents
Advertisement
Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of EPSILON5-A1 - ISP PORTABLE PROGRAMMER USB
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com
Fig. 1.5.3.2 Programmer – maximum current ratings
#
Programmer mode
1
Programmer supplying
power to the Target System
1.5.4 DC Power Input Connector (CON1)
It is possible to power the programmer from an external power supply by plugging the DC Power
Cable supplied with the programmer into CON1. This connector is a 2.5mm jack socket.
Fig. 1.5.4 CON1 – pin-out
Description
Voltage
Centre pin
+3.1V to +5.0V from external power supply
Outer
0V (Ground connection)
1.5.5 DC Power Cable Specification
The programmer is supplied with a DC power cable which plugs into CON1. The other end of this
cable is supplied with bare wire ends for connecting to an external power supply. e.g. bench PSU.
Cable Specification:
•
One end features a female 2.5mm DC jack plug
•
The other end of the cable is supplied with bare wire ends for connecting to an external power
supply. e.g. bench PSU.
•
The black lead with the white stripe is the +VE cable.
•
The all black lead is the GROUND cable.
•
The external voltage applied to CON1 must be between 3.1 and 5.0V !
10
Comments
•
Power is supplied from External
Power Supply via CON1
•
J9 is fitted connecting the CON1
Vcc to the Target Vcc
EPSILON5 MKII Programmer - User Guide V1.12 – 1
Typ
Max
Units
-
300
mA
st
August 2007
Advertisement
Table of Contents
