Push Button Functions - Equinox Systems EPSILON5 MKII User Manual

Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of EPSILON5-A1 - ISP PORTABLE PROGRAMMER USB
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com

1.4 Push Button Functions

Button
4
The EPSILON5 programmer features two push buttons,
<YES> and <NO>, which are used to control the programmer
when it is operating in 'Standalone Mode'.
The function of these buttons is described below.
Function of button
The <No> button has the following functions:
i. To cancel a programming action
ii. To return to the 'Standby' state
The <YES> button has the following functions:
i. To execute a programming project which has been pre-loaded
into the programmer 'FLASH Memory Store'.
ii. To return to the 'Standby' state
EPSILON5 MKII Programmer - User Guide V1.12 – 1
st
August 2007