Table of Contents
Advertisement
8051 FLASH Professional Starter System Starter Manual V1.00
Device Support
It is possible to program Atmel 8051 microcontroller devices using two different methods:
ZIF socket - Parallel Programming Mode
The following devices can be programmed in the Activ8r ZIF socket. These devices can only
be programmed in parallel programming mode.
AT89C1051
AT89C1051U
AT89C2051
AT89C4051
In-system Programming (ISP) - Serial Programming Mode
The following devices can only be programmed within the user target system using the ISP
cable. These devices can only be programmed in serial programming mode with the Activ8r
programmer. The parallel programming mode of these devices is NOT supported.
AT89S8252
AT89S53
AT89LS8252
AT89LS53
Please note:
In-system programming of the 89LS devices is only supported with a target voltage of +5V.
5
Advertisement
Table of Contents
