Table of Contents
Advertisement
Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of EPSILON5-A1 - ISP PORTABLE PROGRAMMER USB
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com
2.6 Standalone Mode
2.6.1 Overview
In 'Standalone Mode', the programmer is not connected to the PC and is controlled via the <YES>
and <NO> push buttons on the front panel instead. This is ideal for both field and production ISP
requirements as the programming data is held locally in FLASH memory on the programmer so a PC
is not required.
The LED Status Indicators are used to display the current status of the programmer. A single
'Programming Project' must be uploaded to the programmer using the EQTools 'Upload Wizard'
before the programmer can be operated in Standalone Mode.
2.6.2 Steps required before operating the programmer in Standalone Mode
Before operating the programmer in Standalone Mode, you will need to:
•
Create a Development Mode Project in EDS
•
Use EDS to test that all the project parameters are correct by attempting to program the
FLASH, EEPROM, Fuses and Security Options of the Target Chip
•
Once you are happy that the EDS project is working correctly, you then need to export
your EDS project to Project Builder.
•
Compile the Project in Project Builder
•
Add the Project to a Project Collection using Project Manager
•
Upload the Project Collection to the attached programmer using Upload Wizard.
2.6.3 How to export your Development (EDS) project to Project Builder
To export your Development (EDS) project to Project Builder:
•
In EDS Mode, select the <Overview> tab
•
Click the <Open/Modify Base Programming Project> button
EDS window will close and your project will be opened by Project Builder
•
On the top icon bar within EQTools, click the <Compile/Build> icon
the project will be compiled
•
Select <Add Project to new Project Collection>
your project will be added as an entry in the Project Manager window
•
Save the Project Collection with a suitable name eg. Myprojects.ppc
•
Click the <Upload> icon on the icon bar to upload the Project Collection to the
programmer.
the <Upload Wizard> utility will launch
•
Follow the on-screen instructions to upload the Project Collection to the programmer.
EPSILON5 MKII Programmer - User Guide V1.12 – 1
st
August 2007
33
Advertisement
Table of Contents
