Table of Contents
Advertisement
Distributor of Equinox Technologies: Excellent Integrated System Limited
Datasheet of EPSILON5-A1 - ISP PORTABLE PROGRAMMER USB
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com
once.
7a. Programming operation has FAILED !
7b. To clear the ERROR CONDITION:
Press
7c. To re-program the same Target System
Go to step 5.
7d. To program a new Target System after a
FAILURE:
Go to step 9.
8a. Programming operation has PASSED.
Go to step 9.
9.
Switch Target Power Supply OFF
10. Disconnect ISP Cable from Target System
11. Repeat procedure from step 1 with new
Target System.
52
outputs connected to the
Target System
mode
key once
outputs to connect to Target
system
released (target code may
start to execute)
down
No change
EPSILON5 MKII Programmer - User Guide V1.12 – 1
FAIL LED flashes
Programmer tri-states all
FAIL LED goes out
Programmer is in 'Standby'
<PASS> LED flashes
Programmer tri-states all
Target System RESET is
Target System powers
All LED's go OFF
Programmer powers OFF
st
August 2007
Advertisement
Table of Contents
