PRODUCT NAME: CRUZ CABINET
ITEM NUMBER: MF035
ASSEMBLED DIMENSIONS : 34"H x 30"W x 12"D
SHELVES:
Insert Shelf Supports (A) into pre-drilled holes.
Set each Shelf (B) level upon Supports.
LEVELERS: Cabinet is equipped with Rotary
Levelers installed under each leg. If necessary,
adjustments may be made by carefully lifting
applicable corner and turning Levelers clock-
wise/counterclockwise.
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 12-7-2022
Serious or fatal crushing injuries can occur from a furniture tip-over
-Two person assembly suggested.
Ltr.
Qty.
Hardware/Components* Included
A
8
B
2
C
2
*Hardware and Shelves separately packaged and ship on top of console.
(A)
Cleaning and Care
Periodically dust with a soft, dry cloth.
Prevent finish damage: do not use alcohol based
cleaners or polishers. Promptly remove spills.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
WARNING
Tip-Over Hazard
ANCHORING HARDWARE INCLUDED
Prevent tipping accidents. Anchor your furniture.
REQUIRED TOOLS:
Phillips Screwdriver
Shelf Supports
Shelves (B)
Wall Anchoring
(Anti-tip) Kit
See page 2
(B)
MADE IN VIETNAM
Page 1 of 2