Table of Contents
Advertisement
Chapter 5
Web-based Interface Configuration for Compex SGX3226
Broadcast Rate Limit
This function sets broadcast limit to
the desired rate for the specified port.
It
controls
broadcasting packets. The ranging for
Broadcast rate limit varies from 0% to
100%. The higher the rate is, the more
data can pass through the traffic. Rate
is the percent of the traffic to allow
before throttling.
Port VLAN ID
VLAN ID is the sequence number of a
VLAN. Compex SGX3226 has 32
VLANs to specify and therefore the
VLAN ID is from 1 to 4091.
Flow Control
This feature reports the Flow Control setting of the port. Enabling the Flow Control
function allows Half and Full Duplex mode.
NOTE
If the port (management port) that is connected to your management PC has
disabled, the communication link between users and the management system will
be severed and the management cannot be proceed further. So, disabling the
management port will be rejected automatically by the management system.
1.
Click Apply and then Save button to update the changes.
Notice that the screen is divided into two sections. The Port Statistics page displays
the detailed information on each port. Click Refresh button to view the current port
status of Compex SGX3226.
the
reception
of
Port Priority
To specify the VLAN priority to expedite
the VLAN traffic.
Port State
Enabling this function allows the chosen
port to receive and forward the packets,
and learns the respective source MAC
Addresses.
20
Advertisement
Table of Contents
