Table of Contents
Advertisement
Chapter 5
Web-based Interface Configuration for Compex SGX3226
5.3
Trunk Configuration
Port Trunking is the ability to group together several switch ports to increase the
bandwidth between Compex SGX3226 and other switch. This is an inexpensive
method to increase throughput between switches (or to servers).
NOTE
To avoid broadcast storms, or looping in your network while configuring trunks,
you need to disable/disconnect all the ports that you wish to add/remove from
both sides of the trunk. Once you have finished configuring trunking, enable/re-
connect the ports.
1.
You can choose up to 4 ports for trunking by selecting '-' as 'T'.
2.
Click on the Apply button to update the changes and then the Save button to
update the latest configuration.
NOTE
You may set up to 4 trunking ports for the switch.
22
Advertisement
Table of Contents
