Application On Stack Management - Compex SGX3226 User Manual

24+2 gigabit snmp switch with integrated router

Hide thumbs Also See for SGX3226:

Table of Contents

Chapter 7

Advanced Configuration for Compex SGX3226

7.3.1

Application on Stack Management

From the figure shown below, SGX3226 Unit #1, #2 and #3 are stacked

accordingly. Individual switches are linked to its respective workgroup,

such as Workgroup A, B and C. Enabling the stacking function allows the

master switch to do the configuration on Unit #2 or Unit #3.

SGX3226 Unit #1(Master)

192.168.100.128

SGX3226 Unit #2 (Slave)

In order to control all the slave switches, you need to enable the stacking

function for all switches. You may follow the procedures as shown below:

192.168.100.128

SGX3226 Unit #3 (Slave)

192.168.100.128

Figure 7.1

Application on Stacking function

Connect a RJ45 MDI straight Ethernet cable from the Control Station

to SGX3226 Unit #1. Enter http://192.168.100.128 in the internet

browser and select Master option in the Stacking State field. You

Control Station

Workgroup B

Workgroup C

Workgroup A

Table of Contents