Table of Contents
Advertisement
Chapter 8
Using SYSTEM TOOLS Menu
8.5.1
Forget your password
You can simply reset the password using Hyper Terminal program.
1.
2.
3.
4.
5.
You may change your password using Hyper Terminal program by typing
the command, sys set password and hit Enter key from your keyboard. If
you cannot remember the command, type in help and the command listing
will be listed.
In the Hyper Terminal environment, switch OFF and ON Compex
SGX3226.
When "Press ENTER to stop auto-boot ..." message appear on the
screen, hit "Enter" key on the keyboard within 5 seconds.
Upon seeing the word Password appeared on the screen, enter +=_-)0
and hit the Enter key from your keyboard to start resetting.
Next, the screen will display " Default password restored successfully".
This indicates that the system has successfully reset the password to
default setting.
Type in reboot to switch your Compex SGX3226 to normal mode.
This time, you can enter the default password, which is password to
login to the configuration page.
63
Advertisement
Table of Contents
