Chapter 4
Software Installation
The main menu includes four sections in the Command Menu Window, namely
CONFIGURATION, ADVANCED, SYSTEM TOOLS and HELP. The overall
descriptions for individual sub-functions are listed as shown:
CONFIGURATION menu
•
Port Configuration – configuration for communications via network
•
VLAN Configuration – setup Virtual LAN, whether in tagged or untagged-
based
•
Trunking Configuration – Extend the limitation of bandwidth
•
DHCP Configuration – setup, reserve or activate DHCP
•
WAN Configuration – support Static, Dynamic and PPP over Ethernet services
•
NAT Configuration – increase security for unauthorized access through WAN
ADVANCED menu
•
STP Configuration - discovers and eliminates redundant paths in the network
topology
•
IGMP Configuration - allows the device to forward multicast traffic
intelligently
•
Stack Configuration - allows user to enable the stacking function of the
switches.
•
SNMP Configuration – monitor and oversee network
•
RMON Statistics - enables various network monitors and console systems to
exchange network-monitoring data
•
Port Security – secure/reserve certain port/s from other user's access
•
MirrorPort Configuration – duplicate a port's traffic on a port
•
Aging Control – limit the resource in the forwarding table
•
Address Search – search for Host and MAC address of the connected device in
the network
SYSTEM TOOLS menu
•
System Clock – managed and utilize timing based function
•
Remote Management - access your Compex SGX3226 through Internet (WAN)
or Local Area Network.
•
System Configuration – change of IP Address, Subnet Mask or Gateway
•
System Information – indicates essential information of Compex SGX3226
•
Change Password – amend system administrator's password
•
Firmware Upgrade – uploading latest firmware to Compex SGX3226
•
Save or Reset Settings – save or reset all settings
17