Table of Contents
Advertisement
Chapter 7
Advanced Configuration for Compex SGX3226
1.
Bridge Port
This option shows the port of the
bridge that connects to the root bridge.
Priority
The lower the number has higher
priority.
2.
3.
Select STP Config from the Command window.
Select one port from 1 to 26 to connect to the root bridge.
Key in the value for Path Cost (from 1-65535) and set the priority
level (0-255).
Path Cost
This option sets the Spanning Tree path
cost for this port. A lower path cost
represents higher transmission speed.
42
Advertisement
Table of Contents
