Pole Mounted - Project EV Dual Wall Pro Earth User Manual

Installation

Pole Mounted

3.2 Mount on a pole
3.2.1 Open the packaging of the pole, take out the pole and mounting accessories.
Mount on a Pole
1. Open the packaging of the pole, take out the pole and mounting accessories.
3.2.2 The pole must be installed on a hard surface, concrete surface is recommended,
2. The pole must be installed on a hard surface (concrete surface is recommended or
it can also be mounted on a solid ground. Drill holes according to the requirements
ground mount for soft ground). It can also be mounted on a solid ground. Drill holes
marked on the illustration for xing expansion bolts.
according to the requirements marked on the illustration for fixing expansion bolts.
3. Fix the pole onto the holes with expansion bolts. The input cables go into the pole from 3.2.3 Fix the pole onto the holes with expansion bolts. The input cables shall go
the centre at the bottom and will exit through the grommit provided below the charger.
into the pole from the bottom middle area and come out of it from the area below the
cable hooker.
e. Check if the charger is still connected to the computer. Please unplug it from
10
9