Project EV Dual Wall Pro Earth User Manual page 44

FAQ'S
Dual Wall Pro Earth
What Affects The Charging Time Of An Electric Vehicle?
In the case of AC charging the time required to charge depends on the power of the charger, as well as the
power of the inverter installed within the vehicle.
What Kind Of Electrical Connection Is Required To Supply A Charging Station?
The power of the connection depends on the power of the charger. In the case of AC charging station, it is
between 3.7kW and 22kW.
What are the benefits of Electric Vehicles (EV)?
Reduced Emissions – Electric vehicles produce fewer greenhouse gas emissions than internal combustion
engines.
Improved Air Quality – Fewer emissions means reduced environmental pollutants and improved air quality.
Cost Savings
• Fuel – Electricity costs are typically less costly than gasoline.
• Maintenance – Electric vehicles, including plug-in hybrid have fewer powertrain
components and have fewer maintenance requirements than internal combustion
engines, i.e. oil changes, brakes, etc.
• Reduced Noise – Electric vehicles are typically quieter and reduce engine noise
dramatically.
What is the difference between a Level 2 charger and a DC fast charger?
Project EV (240 volt AC input) Pedestal and Wall Mount EV charging stations are well-suited for any
commercial or public location. The sleek design and product features are perfect for spaces such as: retail
locations, restaurants, hotels, public parking areas, schools, apartments, office buildings, or airports.
Project EV, DC Fast Chargers deliver the fastest EV charging rate currently available. The DC Fast Charger is
perfect for high-traffic commercial locations, fleets installations, gas stations, and at locations along major
transportation corridors. The DC Fast Charger is classified as a DC, 750volt, 50amp 3-Phase AC input charging
station capable of 37.5 kW charge per hour.
My Project EV charger is not working and there are no lights on the unit
Check that the circuit breaker at the consumer unit is in the on position. If problem persists, contact Project
EV.
My Project EV charger is not working and is continually flashing red
The unit has detected an overvoltage and has shut down for safety purposes. Turn off the charger for around
a minute and turn back on. If problem persists, contact Project EV.
My Project EV charger is not working and is continually flashing red two times
The unit has detected an undervoltage and has shut down for safety purposes. Turn off the charger for
around a minute and turn back on. If problem persists, contact Project EV.
My Project EV charger is not working and is continually flashing red three times
Check that the red emergency stop button at the top right-hand side of the charger hasn't been accidentally
pressed. Turn the button slightly right to release. If problem persists, contact Project EV.
My Project EV charger is not working and is continually flashing red four times
The unit has detected an overcurrent. Please turn off the charger at the consumer unit for around a minute
and turn back on. If problem persists, contact Project EV.
43