Project EV Dual Wall Pro Earth User Manual page 10

Installation
Wall Mounted
3. Mount the charge point onto the bracket, and fix it with the 2 screws at the bottom of a
charge point. This will secure the charger to the bracket.
4. Using the keys provided, open the door to the charger, crimp the cables using M8-x
Metal crimp lugs. Polarity can be found written on the terminal points - the RCBO is at the
top of the unit (Left is A and Right is B) and may need the resetting to power up. Once
complete, close and lock the access door of the charger.
7kw
Terminal
Wire
9
3.1.3 Put the charge point onto the bracket, and x it with the 2 screws at the bot
the charge point. The installation is done.
3.1.4 Crimp the insulated ferrule or ring terminals on the end of the AC input wire
Connect the wires into the terminal block of the charge point as below. Check th
wiring and then close the RCD in the side window. Close the side window with th
cover, then the wiring is completed.
Model L N PE
7K
7K ≥16m ≥16m ≥16m
≥AWG5 ≥AWG5 ≥AWG5
8
22kw
Model L2
L1
Terminal 22K
Wire 22K ≥16m ≥16m ≥16m
≥AWG5 ≥AWG5 ≥AWG5
L3 N PE
≥16m ≥16m
≥AWG5 ≥AWG5