Pole Mounted - Project EV EVA-07S-S User Manual

Installation

Pole Mounted

3.2 Mount on a pole
3.2.1 Open the packaging of the pole, take out the pole and mounting accessories.
3.2 Mount on a pole
3.2.1 Open the packaging of the pole, take out the pole and mounting accessories.
3.2 Mount on a pole
3.2 Mount on a pole
Mount on a Pole
3.2.1 Open the packaging of the pole, take out the pole and mounting accessories.
3.2.1 Open the packaging of the pole, take out the pole and mounting accessories.
1. Open the packaging of the pole, take out the pole and mounting accessories.
3.2 Mount on a pole
3.2.1 Open the packaging of the pole, take out the pole and mounting accessories.
3.2.2 The pole must be installed on a hard surface, concrete surface is recommended,
2. The pole must be installed on a hard surface (concrete surface is recommended or
it can also be mounted on a solid ground. Drill holes according to the requirements
3.2.2 The pole must be installed on a hard surface, concrete surface is recommended,
ground mount for soft ground). It can also be mounted on a solid ground. Drill holes
3.2.2 The pole must be installed on a hard surface, concrete surface is recommended,
it can also be mounted on a solid ground. Drill holes according to the requirements
marked on the illustration for xing expansion bolts.
according to the requirements marked on the illustration for fixing expansion bolts.
it can also be mounted on a solid ground. Drill holes according to the requirements
marked on the illustration for xing expansion bolts.
marked on the illustration for xing expansion bolts.
3.2.2 The pole must be installed on a hard surface, concrete surface is recommended,
3.2.2 The pole must be installed on a hard surface, concrete surface is recommended,
it can also be mounted on a solid ground. Drill holes according to the requirements
it can also be mounted on a solid ground. Drill holes according to the requirements
marked on the illustration for xing expansion bolts.
marked on the illustration for xing expansion bolts.
3.2.3 Fix the pole onto the holes with expansion bolts. The input cables shall go
3.2.3 Fix the pole onto the holes with expansion bolts. The input cables shall go
3. Fix the pole onto the holes with expansion bolts. The input cables go into the pole from 3.2.3 Fix the pole onto the holes with expansion bolts. The input cables shall go
into the pole from the bottom middle area and come out of it from the area below the
into the pole from the bottom middle area and come out of it from the area below the
the centre at the bottom and will exit through the grommit provided below the charger.
into the pole from the bottom middle area and come out of it from the area below the
cable hooker.
cable hooker.
3.2.3 Fix the pole onto the holes with expansion bolts. The input cables shall go
cable hooker.
into the pole from the bottom middle area and come out of it from the area below the
cable hooker.
3.2.3 Fix the pole onto the holes with expansion bolts. The input cables shall go
into the pole from the bottom middle area and come out of it from the area below the
cable hooker.
9
9
9
12
9