Project EV Dual Wall Pro Earth User Manual page 12

Installation
Pole Mounted
4. Position the charge point on top of the mounting pole and secure with 4 screws, 2 from
the box of the mounting pole and 2 from the charger (originally holding the wall bracket
to the charger). This will secure the charger to the post and the wall mounting bracket is
no longer needed.
5. Using the keys provided, open the door to the charger, crimp the cables using M8-x
Metal crimp lugs. Polarity can be found written on the terminal points - the RCBO is at the
top of the unit (Left is A and Right is B) and may need the resetting to power up. Once
complete, close and lock the access door of the charger.
7kw
Model
Terminal 7K
Wire 7K
(3). Right-click on Local Area Connection and click on Properties.
11
L N PE
≥16m ≥16m ≥16m
≥AWG5 ≥AWG5 ≥AWG5
22kw
Model L2
L1
Terminal 22K
Wire 22K ≥16m ≥16m ≥16m
≥AWG5
≥AWG5 ≥AWG5
L3 N PE
≥16m ≥16m
≥AWG5 ≥AWG5