Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Project EV APEX-7.3
Summary of Contents for Project EV APEX-7.3
- Page 1 Instruction Manual APEX-7S / APEX-7S-4G / APEX-7S-T / APEX-7S-T-4G...
-
Page 2: Table Of Contents
Product Data ................................Installation ................................... The APEX App ................................Anti-Tamper Switch ............................... Charging Mode and Operation ........................Maintenance ................................Warranty ..................................Contact Information www.projectev.co.uk enquiries@projectev.co.uk 0333 733 0333 Project EV, Unit 1 Lakes Court, Lancaster Park, Newborough Road, Burton-On-Trent DE13 9PD... -
Page 3: Safety Information
Safety Information Project EV chargers are designed and tested in accordance with international safety requirements. However, certain safety precautions must be taken when installing and operating this. The installer must read and follow all instructions, cautions and warnings in this installation manual. - Page 4 Safety Information Product Handling To ensure safety, the following points should be paid attention to: - All accessories are placed separately during transport or handling. - Avoid violent shock and impact. Out of the box inspection - Please open the charging pile packaging and verify all parts according to the attachment list.
-
Page 5: Packaging List
Packaging List EV Charger Mounting Backplate Mounting Bracket RFID Card Quantity: x1 Quantity: x1 Quantity: x1 Quantity: x2 Wall Plugs Fixing Screws Ferrule Crimp Assembly Screws Quantity: x4 Quantity: x4 Connectors Quantity: x2 Quantity: x3 Self Tapping Screw CT Clamp Eastron SDM120 ct - MID Approved Quantity: x2... -
Page 6: Product Information
Product Introduction Tethered Charger Side Cover Charging Plug Stop Switch Status Card in Plug & Indicator Reader Charge Mode Light Untethered Charger Stop Switch Card Status in Plug & Reader Side Cover Indicator Charge Mode Light... -
Page 7: Product Data
Product Dimension 320*190*144 mm 320*190*144 mm Product Weight 5.6kg 2.4kg Product Colour Options *APEX-7.3 chargers are ‘EV Steel’ colour as standard. Further colour options are available upon request, subject to availability. Mounting & Accessories Floor Pole Opt. APEX-SPOST Opt. APEX-SPOST... -
Page 8: Installation
Installation Wall-Mounted Installation Method: 1. Open the package and mark 4 holes in the wall (φ 8 * 50mm). 2. Fit into the wall plug. 3. Attach the mounting backplate with screws to the mounting wall. 4. Attach the bracket to the charger. 5. - Page 9 Installation Post Mounted Installation Method (Using Additional Product Code APEX-SPOST) 1. Drill holes on the concrete or solid floor， four 165 * 95 holes with diameter φ 10mm deep 50mm screws and one φ 60mm through duct hole. 2. Install and fix the anchor screws. 3.
- Page 10 Installation Electrical Connection Step 1: Insert mains cable into the gland. Step 2: Open the side cover, insert the cable and tighten the gland. Step 3: Unscrew the terminal screws. Terminate cables, and replace the side cover. RS485...
-
Page 11: The Apex App
The APEX App DOWNLOADING THE APP Download the APEX app from the Google Play or Apple app store. Registering an account Select the country where you would like the account registered to. Press Register to enter registration page. Fill in all details provided, and enter verification code sent to your email address. - Page 12 The APEX App Adding a chargepoint Click on the add button, and scan the QR code or enter the serial number located on the side of the chargepoint. Enter a nickname for the chargepoint. Your charger will then appear on the screen as shown below. Adding the chargepoint to a network Click on the three dots in the right corner of the screen.
-
Page 13: Anti-Tamper Switch
The APEX App Adding an RFID Card Click on the three dots in the right corner of the screen. On the drop down menu, click on Whitelist. Click Add to add an RFID card to the account. Anti Tamper Switch In December 2022, regulations were enforced for all chargepoints to be installed with an anti-tamper switch for security measures. - Page 14 The APEX App Accessing the settings menu Click on the three dots in the right corner of the screen. On the drop down menu, click on settings. Adjust all settings required. Upgrading Firmware Click on the three dots in the right corner of the screen. On the drop down menu, click on upgrade.
- Page 15 The APEX App Scheduling a charge Click on the three dots in the right corner of the screen. On the drop down menu, click on settings. Press Timing Charging. For a one time schedule, press add single and enter the scheduled charge time. For a regular cycle, press add cycle and choose the days and times of the scheduled charge times.
-
Page 16: Charging Mode And Operation
Charging Mode and Operation Users can set three charging modes through the charging mode setting interface of the APP: controlled, locked, plug and charge. A. Plug & Charge Charging will start automatically after EV plugged in. If you want to stop the charging, just press the stop button on the side of the charger. - Page 17 Charging Mode and Operation • Stop Charging: 1. Swipe card 2. Charging session end C. App Mode • Start Charging: 1.Set the charger to the Controlled mode 2. Insert the charging plug into the EV 3. Click to Start the Charge on the APP 4.
-
Page 18: Maintenance
Maintenance Troubleshooting If fault occurs, users can check the fault information on the APP. Fault Code on App Solution Electronic Lock Fault Set the electronic lock status to the correct position. Or seek help from us. Emergency stop fault Reset the emergency stop button. Or seek help from us. -
Page 19: Warranty
Meter and CT Clamp Installation CT clamp for solar or load balancing gets installed around the live cable from the main fuse. The arrow points to the flow of electricity, and when solar is producing, the CT clamp registers this as a minus figure. - Page 20 enquiries@projectev.co.uk www.projectev.co.uk 0333 733 0333 Information correct as of 21/09/2023 [V4.13]...