Component Identification - M-system R7L-TS4-R Instruction Manual

COMPONENT IDENTIFICATION

Status Indicator LED
■ STATUS INDICATOR LED
ID COLOR STATE
ON
PWR Green
OFF
ON
Blink
approx.
0.5 Hz
ONLINE Green
Blink
approx.
2 Hz
OFF
ON
ERR Red
Blink
OFF
ON
TX/RX Green
OFF
ON
Blink
SVCE Green approx.
0.5 Hz
OFF
■ INDICATOR LED
Used to show network variable status assigned to fbLED.
ON : LED ON
OFF : LED OFF
■ SERVICE SWITCH
Used to identify the node in L
tion.
■ RESET SWITCH
Used to reset the Neuron Chip. Press the switch behind the
front cover to reset.
Control functions are halted while completing resetting and
restarting. Confirm no danger before conducting resetting.
SEN TRONIC
Service SW
Reset SW
PWR ERR SVCE
TX/RX
ONLINE
4 5 6 7
1 2 3
L W , Power Supply
ON ORKS
Terminals
MEANING
Internal 5V is normal
Internal 5V is abnormal.
Online
Offline
Sending/receiving of Net-
work
Variables has stopped.
Receiving Wink Message
Abnormal state
Writing in the non-volatile
memory
Abnormal state
Normal state
Sending/receiving Network
Variables
Communication is lost.
No network information
Offline
Sending/receiving of Net-
work
Variables has stopped.
Normal state
W network configura-
ON ORKS
056 222 38 18
AG
Factory Configuration Port
0 1 2 3 4 5 6 7
10 11 12 13 14 15 16 17 18
1 2 3 4 5 6 7 8
Input Terminals
■ POWER SUPPLY, L W
ON
4
NET1
1
NET1
NO. ID
1 NET1
2 NET2
3 FG
4 NET1
5 NET2
6 U (+)
7 V (–)
Note: L W wiring must be paired between NET1 termi-
ON ORKS
nals and/or NET2 terminals.
■ INPUT TERMINAL ASSIGNMENT
10 11 12 13
+IN0 –IN0 +IN1
1 2 3 4
+CJ0 –CJ0 +CJ1 –CJ1
NO. ID FUNCTION
1 +CJ0 CJC 0
2 –CJ0 CJC 0
3 +CJ1 CJC 1
4 –CJ1 CJC 1
5 NC No connection
6 +CJ2 CJC 2
7 –CJ2 CJC 2
8 +CJ3 CJC 3
9 –CJ3 CJC 3
mailbox@sentronic.com www.sentronic.com
R7L-TS4
Indicator LED
8 9 A B C D E F
9
TERMINAL ASSIGNMENT
ORKS
5 6 7
NET2 U (+) V (–)
2 3
NET2 FG
FUNCTION, NOTES
L W communication 1
ON ORKS
L W communication 2
ON ORKS
FG
L W communication 1
ON ORKS
L W communication 2
ON ORKS
Power input
Power input
14 15 16 17 18
–IN1 NC +IN2 –IN2 +IN3 –IN3
5 6 7 8 9
NC +CJ2 –CJ2 +CJ3 –CJ3
NO. ID FUNCTION
10 +IN0 T/C + 0
11 –IN0 T/C – 0
12 +IN1 T/C + 1
13 –IN1 T/C – 1
14 NC No connection
15 +IN2 T/C + 2
16 –IN2 T/C – 2
17 +IN3 T/C + 3
18 –IN3 T/C – 3
EM-7804-B Rev.8 P. 2 / 19