Component Identification - M-system R7I4DML3-DC32A Instruction Manual

COMPONENT IDENTIFICATION

Status Indicator LEDs
PC Configurator Jack
Connector for
MECHATROLINK
Communication
Station Address Setting Rotary SW
■ STATUS INDICATOR LED
ID COLOR FUNCTION
PWR Green Turns on when the internal power is sup-
plied normally.
ERR Red Turns on at MECHATROLINK-III com-
munication error
CON Green Turns on at MECHATROLINK-III con-
nection is established
LNK1 Green Turns on at MECHATROLINK-III LNK1
is established
LNK2 Green Turns on at MECHATROLINK-III LNK2
is established
■ DISCRETE OUTPUT STATUS INDICATOR LED
LED green indicators shows the output signal status.
ON : LED ON
OFF : LED OFF
PWR
CON LNK2
CNFG.
X0 X1 X2 X3 X4 X5 X6 X7
ERR LNK1
SA1 X10
SA2 X1
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
Discrete Output Status Indicator LEDs
X8 X9 XA XB XC XD XE XF X10 X11 X12 X13 X14 X15 X16 X17 X18 X19 X1A
Output Connector
■ STATION ADDRESS
Station Address is selected between 03H and EFH in hexa-
decimal.
The SA1 switch determines the MSD, while the SA2 switch
does the LSD of the address.
(Factory setting: 03H)
R7I4DML3-DC32A
X1B X1C X1D X1E X1F
Terminals for
Power Supply &
Sencor Excitation
Station Address Setting SA1 (MSD) (x10)
Station Address Setting SA2 (LSD) (x1)
EM-8008-C P. 2 / 12