M-system R7L-TS4-R Instruction Manual page 12

• Configuration Properties
CONFIGURATION NETWORK
PROPERTY VARIABLE
SCPTnumDigits nviCVIn
SCPTnvType nviCVIn
SCPTnvType nvoCVOut
SCPTsetpoint[0] nviCVIn
SCPTsetpoint[1] nviCVIn
SCPTsetpoint[0] nvoCVOut
SCPTsetpoint[1] nvoCVOut
SEN TRONIC
TYPE
{ Range } EXPLANATIONS
{ Default }
Source of the input to nviCVIn
0 : LonMaker bound output network variable
60 : fbTS[0] nvoTSVal
{SNVT_count}
61 : fbTS[1] nvoTSVal
{0,60...63}
62 : fbTS[2] nvoTSVal
{0}
63 : fbTS[3] nvoTSVal
Match nviCVIn network variable type to that of the source
when using 60...63.
{SNVT_nv_type}
Indicates nviCVIn type.
{}
For use with LonMaker and other tools.
{SNVT_temp}
{SNVT_nv_type}
Indicates nvoCVOut type.
{}
For use with LonMaker and other tools.
{SNVT_temp}
Scaling setting
Same as nviCVIn
Output SCPTsetpoint[0] (nvoCVOut) is provided with the
input SCPTsetpoint[0] (nviCVIn).
Same as nviCVIn
Output SCPTsetpoint[1] (nvoCVOut) is provided with the
input SCPTsetpoint[1] (nviCVIn).
Same as nvoCVOut
Output is proportionally provided to the input between
these setpoints.
Same as nvoCVOut
SCPTsetpoint[0] < SCPTsetpoint[1]
056 222 38 18 mailbox@sentronic.com
AG
R7L-TS4
EM-7804-B Rev.8 P. 12 / 19
www.sentronic.com