Table of Contents
Advertisement
8. SLEEP
When there is no signal, the display will go to sleep.
9. WAKE UP
Press ON / OFF to turn on the display. The display will store the current values.
10. MOVEMENT AND GOAL SETTING
a. QUICK MOVEMENT:
In the automatic scanning mode, directly step on the machine movement, and the electronic meter
can begin to calculate the motion data.
b. MOTION GOAL SETTING:
In automatic scanning mode, the time, distance, calories and heart rate will be automatically
scanned every six seconds. In the cyclic state, select any function. Press UP or DOWN to set the
target value. After setting, press MODE key to enter the next setting.
c. TARGET TRAVEL:
After setting any movement target, directly step on the machine movement, the electronic watch
can start to calculate the movement data, and the set target value starts to count down. When goal
is reached, the window flashes (and sounds an alarm) and starts the sequence count.
10
| COMPUTER DISPLAY
Advertisement
Table of Contents
