Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Gage Bilt GB752SR-8
Summary of Contents for Gage Bilt GB752SR-8
- Page 1 ORIGINAL INSTRUCTIONS GB752SR-8 INSTALLATION TOOL GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE E-MAIL US FOR A DISTRIBUTOR NEAR YOU. GAGE BILT 44766 Centre Court, Clinton Twp., MI. 48038 USA Ph: +1 (586) 226-1500 Fax: +1 (586) 226-1505 MADE in USA solutions@gagebilt.com / www.gagebilt.com...
-
Page 2: Table Of Contents
Description and Technical Specifications ..........................4 Description of Functions ................................5 Warnings ....................................6 Principle of Operation ................................7 How to set-up the GB752SR-8 ..............................8 How to use the GB752SR-8 ............................... 9 Maintenance ..................................... 10 Filling ......................................11 Bleeding ....................................12 Troubleshooting .................................. -
Page 3: Eu Conformity And Warranty
GAGE BILT DECLARATION OF CONFORMITY MANUFACTURER: Gage Bilt Inc. 44766 Centre Ct. Clinton Twp. Michigan U.S.A. +1(586-226-1500) WE DECLARE THAT THE EQUIPMENT SPECIFIED HEREIN CONFORMS TO THE FOLLOWING DIRECTIVES AND STANDARDS Machinery Directive 2006/42/EC EN12100-1 & EN12100-2 EN792-1:2000+A1 EU REPRESENTATIVE Edgar Hausmann GmbH Förster-Busch-Str. -
Page 4: Description And Technical Specifications
3,800 lbs. (16.9 kN) with 90 psi (6.2 bar) air pressure at the air inlet. The GB752SR-8 split handle installation tool operates on 90 to 100 psi. (6.2-6.9 bar) of air pressure, with 90 psi. (6.2 bar) air pressure providing maximum efficiency. -
Page 5: Description Of Functions
DESCRIPTION OF FUNCTIONS Hanger Head Cylinder Assembly Deflector Bleed Screw Hydraulic “PULL” Actuator lever assembly Actuator assembly-air Air line “RETURN” Bleed Screw Handle Assembly Air Inlet Image may not reflect actual tool GB752SR-8 INSTALLATION TOOL REV 4/22... -
Page 6: Warnings
4. Support the weight of the tool in a stand, tensioner or balancer, because a lighter grip can then be used to support the tool. GB752SR-8 INSTALLATION TOOL REV 4/22... -
Page 7: Principle Of Operation
Piston Rod Assembly moves up Piston Rod Assembly moves down Air Piston moves up Air Piston moves down Air exhaust Air exhaust Pressurized Oil Unpressurized Oil Pressurized Air Unpressurized Air Image may not reflect actual tool GB752SR-8 INSTALLATION TOOL REV 4/22... -
Page 8: How To Set-Up The Gb752Sr-8
HOW TO SET-UP THE GB752SR-8 WARNING: Only qualified and trained operators shall install, adjust or use the assembly power tool for non-threaded mechanical fasteners. WARNING: Operator MUST read and understand all warnings and cautions. WARNING: It is required that eye protection, hearing protection and safety boots be worn at all times while handling this equipment. -
Page 9: How To Use The Gb752Sr-8
HOW TO USE THE GB752SR-8 WARNING: Only qualified and trained operators shall install, adjust or use the assembly power tool for non-threaded mechanical fasteners. WARNING: Operator MUST read and understand all warnings and cautions. WARNING: It is required that eye protection, hearing protection and safety boots be worn at all times while handling this equipment. -
Page 10: Maintenance
WARNING: Tool must be maintained in a safe working condition at all times and examined on a daily basis for damage or wear. Any repair must be done by qualified personnel trained on Gage Bilt procedures. WARNING: Excessive contact with hydraulic oil and lubricants must be avoided. -
Page 11: Filling
Hole marked #4 on Manifold Assembly (744306) facing upward. Fill Bottle (745263) Handle (744303) Power Cylinder (745331) Top of Handle Assembly Oil passage with o’ring (S832) ***Keep air hole free from oil*** Images may not reflect actual tool. GB752SR-8 INSTALLATION TOOL REV 4/22... -
Page 12: Bleeding
If stroke is not consistent within 1/64" (.0156) repeat bleeding procedure until stroke met. For your consideration, Gage Bilt offers a depth gage (Pt.# A-1935) to help simplify and more accurately check your tool stroke. Please contact Gage Bilt for more information. -
Page 13: Troubleshooting
Replace worn or broken parts. Clean the surface the jaws ride on. b) Stems lodged side by side in the follower. Disassemble, remove stems, and reassemble. Incorrect follower. GB752SR-8 INSTALLATION TOOL REV 4/22... -
Page 14: Overhaul
Perform overhaul in a clean, well lit area using care not to scratch or nick any smooth surface that comes in contact with an o'ring. Use of Lubriplate® (Gage Bilt part no. 402723) or other lubricant is recommended during reassembly to prevent tearing or distorting of o'rings. - Page 15 Thread the actuator assembly-air (704130) all the way into manifold-head assembly (744306) with fingers. Insert and turn 5/8” open end box / adjustable wrench and snug tight approximately 1/4-1/2 turn. Re-attach the lever assembly (724017) with pin. GB752SR-8 INSTALLATION TOOL REV 4/22...
- Page 16 If ports are plugged, use needle nose pliers to grasp end of spring (744144), turning clockwise and pulling to dislodge from groove in casting. Valve spring installation tool assembly (744251) will facilitate the proper installation of the spring (744144). Valve sleeve (743144) can be pulled out using valve sleeve removal tool (744152). GB752SR-8 INSTALLATION TOOL REV 4/22...
-
Page 17: Parts Lists
PARTS LIST GB752SR-8 INSTALLATION TOOL REV 4/22... - Page 18 PARTS LIST GB752SR-8 INSTALLATION TOOL REV 4/22...
-
Page 19: Dexron® Iii Oil Safety Data (Sds)
Use material for its intended purpose or recycle if possible. Oil collection services are available for used oil recycling or disposal. Place contaminated materials in containers and dispose of in a manner consistent with applicable regulations. GB752SR-8 INSTALLATION TOOL REV 4/22... -
Page 20: Nose Assembly Selection Chart And Accessories
GB752SR-8 ACCESSORIES Approved for use on Gage Bilt CE installation tools and/or other manufacturer’s CE approved tools of similar design. (Sold Separately) NOSE ASSEMBLY SELECTION CHART STRAIGHT RIGHT ANGLE OFFSET (Sold Separately) (Sold Separately) (Sold Separately) FASTENER DIA. STRAIGHT *RIGHT ANGLE... - Page 21 Accessories Cont. Approved for use on Gage Bilt CE installation tools and/or other manufacturer’s CE approved tools of similar design. (Sold Separately) Adapter Assembly Adapter Assembly Stroke Limiter #751204 #730715 #752142 Adapts GB715 Series Nose Assemblies to: Adapts 204 offset series nose assemblies Required with all right angle nose Gage Bilt GB752, GB730, GB713, GB731 &...
- Page 22 Accessories Cont. Approved for use on Gage Bilt CE installation tools and/or other manufacturer’s CE approved tools of similar design. (Sold Separately) Grip Gage #269G3 Grip Gage #GB105093 For CHERRYMAX® and CHERRYLOCK® rivets For NAS LOCKBOLTS and blind fasteners (Sold Separately) (Sold Separately) Gage Bilt also supplies pin &...
- Page 23 This page intentionally left blank GB752SR-8 INSTALLATION TOOL REV 4/22...
- Page 24 Riveter Kits Available (Sold Separately) Gage Bilt offers a wide selection of standard and custom kits tailored to your needs. Contact us for more information. Approved Split Riveter Tool Backpacks For 5ft hose Split System Tools. (Sold Separately) DEXRON® IS A REGISTERED TRADEMARK OF GENERAL MOTORS CORPORATION. LOCTITE® IS A REGISTERED TRADEMARK OF HENKEL CORPORATION. TEFLON® IS A REGISTERED TRADEMARK OF E.I.
Need help?
Do you have a question about the GB752SR-8 and is the answer not in the manual?
Questions and answers