Gage Bilt GB754SH-CB Original Instructions Manual
  1. Manuals
  2. Brands
  3. Gage Bilt Manuals
  4. Tools
  5. GB754SH-CB
  6. Original instructions manual

Gage Bilt GB754SH-CB Original Instructions Manual

Installation tool
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ORIGINAL INSTRUCTIONS
S/N: 1001 AND ABOVE
PLEASE CONTACT GAGE BILT FOR
ALL OTHER SERIAL NUMBERS.
GB754SH-CB
INSTALLATION TOOL
GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE
E-MAIL US FOR A DISTRIBUTOR NEAR YOU.
44766 Centre Court, Clinton Twp., MI. 48038 USA
GAGE BILT
Ph: +1 (586) 226-1500 Fax: +1 (586) 226-1505
solutions@gagebilt.com / www.gagebilt.com
MADE in USA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GB754SH-CB and is the answer not in the manual?

Questions and answers

Related Manuals for Gage Bilt GB754SH-CB

Summary of Contents for Gage Bilt GB754SH-CB

  • Page 1 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS. GB754SH-CB INSTALLATION TOOL GAGE BILT TOOLS ARE AVAILABLE WORLDWIDE E-MAIL US FOR A DISTRIBUTOR NEAR YOU. 44766 Centre Court, Clinton Twp., MI. 48038 USA GAGE BILT Ph: +1 (586) 226-1500 Fax: +1 (586) 226-1505 solutions@gagebilt.com / www.gagebilt.com...

  • Page 2: Table Of Contents

    Troubleshooting ..................................13 Overhaul ....................................14-16 Parts Lists .................................... 17-18 DEXRON® III Oil Safety Data (SDS) ............................19 Nose Assembly Selection Chart and accessories ......................20-24 GB754SH-CB S/N: 1001 AND ABOVE REV 7/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

  • Page 3: Eu Conformity And Warranty

    GAGE BILT DECLARATION OF CONFORMITY MANUFACTURER: Gage Bilt Inc. 44766 Centre Ct. Clinton Twp. Michigan U.S.A. +1(586-226-1500) WE DECLARE THAT THE EQUIPMENT SPECIFIED HEREIN CONFORMS TO THE FOLLOWING DIRECTIVES AND STANDARDS Machinery Directive 2006/42/EC EN12100-1 & 12100-2:2010 EN ISO 11148-1:2011 EU REPRESENTATIVE Edgar Hausmann GmbH Förster-Busch-Str.

  • Page 4: Description And Technical Specifications

    The GB754SH-CB split handled installation tool operates on 90 to 100 psi (6.2-6.9 bar) of air pressure, with 90 psi. (6.2 bar) providing the maximum efficiency. At 90 psi. (6.2 bar) of air pressure, the GB754SH-CB does not exceed 80 dB(A) and consumes .30 SCF/cycle (8.50 L/cycle).

  • Page 5: Description Of Functions

    Handle-Split Actuator Lever Assembly Hydraulic “RETURN” Hose Hydraulic “PULL” Hose Air Line Bleed Screw Handle Assembly Air Inlet Image may not reflect actual tool GB754SH-CB S/N: 1001 AND ABOVE REV 7/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

  • Page 6: Warnings

    4. Support the weight of the tool in a stand, tensioner or balancer, because a lighter grip can then be used to support the tool. GB754SH-CB S/N: 1001 AND ABOVE REV 7/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

  • Page 7: Principle Of Operation

    Air Piston moves down Air exhaust Air exhaust Pressurized Oil Unpressurized Oil Pressurized Air Unpressurized Air Image may not reflect actual tool GB754SH-CB S/N: 1001 AND ABOVE REV 7/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

  • Page 8: How To Set-Up The Gb754Sh-Cb

    HEAD CYLINDER FASTENER WORK COLLECTION BOTTLE ACTUATOR RED SHIPPING PLUG USER QUICK DISCONNECT FITTING AIR INLET AIR HOSE Image may not reflect actual tool GB754SH-CB S/N: 1001 AND ABOVE REV 7/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

  • Page 9: How To Use The Gb754Sh-Cb

    5. Release actuator as soon as fastener breaks. 6. Repeat steps 1-5. Release actuator as soon as fastener breaks. Repeat steps 1-4. Images may not reflect actual tool or fastener GB754SH-CB S/N: 1001 AND ABOVE REV 7/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

  • Page 10: Maintenance And Hydraulic Thread Preparation

    WARNING: Tool must be maintained in a safe working condition at all times and examined on a daily basis for damage or wear. Any repair must be done by qualified personnel trained on Gage Bilt procedures. WARNING: Excessive contact with hydraulic oil and lubricants must be avoided.

  • Page 11: Filling

    #2 *located on far side* o’ring (S832) ***Keep air hole free from oil*** Hole marked “P” on Manifold Handle (745303) Images may not reflect actual tool. GB754SH-CB S/N: 1001 AND ABOVE REV 7/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

  • Page 12: Bleeding

    Subtract dimension (A) from dimension (B). If stroke is not consistent within 1/64" (.396 mm) repeat bleeding steps 2-15 until stroke met. For your consideration, Gage Bilt offers a depth gage (Pt.# A-1935) to help simplify and more accurately check your tool stroke. Please contact Gage Bilt for more information.

  • Page 13: Troubleshooting

    Replace worn or broken parts. Clean the surface the jaws ride on. Stems lodged side by side in the follower. Disassemble, remove stems, and reassemble. Incorrect follower. GB754SH-CB S/N: 1001 AND ABOVE REV 7/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

  • Page 14: Overhaul

    Perform overhaul in a clean, well lit area using care not to scratch or nick any smooth surface that comes in contact with an o'ring. Use of Lubriplate® (Gage Bilt part no. 402723) or other lubricant is recommended during reassembly to prevent tearing or distorting of o'rings.
  • Page 15 Insert and turn 5/8” open end wrench / adjustable wrench and snug tight approximately 1/4-1/2 turn. Reattach actuator lever assembly (704343) and pin-slotted (400608). GB754SH-CB S/N: 1001 AND ABOVE REV 7/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
  • Page 16 Valve spring installation tool (744251) will facilitate the proper installation of the spring (744144). Valve sleeve (743144) can be pulled out using valve sleeve removal tool (744152). GB754SH-CB S/N: 1001 AND ABOVE REV 7/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

  • Page 17: Parts Lists

    PARTS LIST GB754SH-CB S/N: 1001 AND ABOVE REV 7/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
  • Page 18 PARTS LIST GB754SH-CB S/N: 1001 AND ABOVE REV 7/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

  • Page 19: Dexron® Iii Oil Safety Data (Sds)

    Use material for its intended purpose or recycle if possible. Oil collection services are available for used oil recycling or disposal. Place contaminated materials in containers and dispose of in a manner consistent with applicable regulations. GB754SH-CB S/N: 1001 AND ABOVE REV 7/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

  • Page 20: Nose Assembly Selection Chart And Accessories

    GB754SH-CB ACCESSORIES Approved for use on Gage Bilt CE installation tools and/or other manufacturer’s CE approved tools of similar design. (Sold Separately) NOSE ASSEMBLY SELECTION CHART RIGHT ANGLE *OFFSET STRAIGHT (Sold Separately) (Sold Separately) (Sold Separately) Grip Gage #269G3 FASTENER DIA.
  • Page 21 Accessories Cont. Approved for use on Gage Bilt CE installation tools and/or other manufacturer’s CE approved tools of similar design. (Sold Separately) Adapter Assembly Adapter Assembly Adapter Assembly #745751 #353204 #745205 Adapts all offset 713 and 752 series noses Adapts all offset 204 series noses Adapts all offset 205 series noses.
  • Page 22 Standard Hyd. Hose Length - 3ft (1.m) 5t Hyd. Hoses are recommended with use of Backpack Additional custom lengths are available. Images may not reflect actual tools. GB754SH-CB S/N: 1001 AND ABOVE REV 7/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
  • Page 23 This page intentionally left blank GB754SH-CB S/N: 1001 AND ABOVE REV 7/22 PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.
  • Page 24 Riveter Kits Available (Sold Separately) Gage Bilt offers a wide selection of standard and custom kits tailored to your needs. Contact us for more information. Approved Approved Split Riveter Tool Backpacks For 5ft hose Split System Tools. (Sold Separately) MAGNA-GRIP® IS A REGISTERED TRADEMARK OF HOWMET AEROSPACE. TEFLON® IS REGISTERED TRADEMARK OF E.I. DUPONT DE NEMOURS & CO. LUBRIPLATE® IS A REGISTERED TRADE- MARK OF FISKE BROTHERS REFINING CO.

Table of Contents