Table of Contents
Advertisement
1.4
Jumpers and Connectors
Connectors on the PCE-3029/4129 single host board link it to external devices such
as hard disk drives and a keyboard. In addition, the board has a number of jumpers
used to configure your system for your application.
The tables below list the function of each of jumpers and connectors. Later sections
in this chapter give instructions on setting jumpers. Chapter 2 gives instructions for
connecting external devices to your motherboard.
Table 1.1: Jumper List
Label
JCMOS1
JME1
JWDT1 JOBS1
Table 1.2: Connectors
Label
LPT1
LAN1
LAN2
VGA1
KBMS1
COM12
FP1
JCASE1
CPUFAN1
LANLED1
HDAUD1
USB1
USB23
USB45, USB67, USB89 USB port 4 ~ 9 with box header (2.0)
USB11
SATA0
SATA1
SATA2
SATA3
CPU1
DIMMA1
DIMMB1
GPIO1
LPC1
PWR1
DVI1
DP1
EXPCIE1
MINIPCIE MSATA
Function
CMOS clear
Enable ME
Watchdog timer output selection and HW monitor alarm
Function
Parallel port, Parallel port x 1, supports SPP/EPP/ECP mode
Intel I219V (PCE-3029); Intel I219LM (PCE-4129)
Intel I211AT (PCE-3029); Intel I210AT (PCE-4129)
VGA connector
PS/2 keyboard and mouse connector
Serial port: COM1 (RS-232), and COM2 (RS-232)
HDD LED, power LED, SNMP SM_Bus, reset, power on/off
Case Open
CPU FAN connector (4-pin)
LAN1/2 LED extension connector
HD audio extension module connector
USB port 1 on rear I/O (3.0)
USB port 2, 3 with box header (3.0)
USB port 11 with type A connector (2.0)
Serial ATA1 (3.0)
Serial ATA2 (3.0)
Serial ATA3 (3.0)
Serial ATA4 (PCE-4129: 3.0)
CPU Socket
Memory connector channel A
Memory connector channel B
GPIO pin header (SMD pitch-2.0 mm)
COM port module expansion pin-header
12 V, 5 V, power connector
DVI connector
Display pin header to stack board
(Display type depends on optional stack board)
Mini PCIe pin header to stack board
M-SATA (default) or mini-PCIe connector (optional for PCE-4129)
5
PCE-3029/4129 User Manual
Advertisement
Table of Contents
