Jumpers And Connectors; Software Installation; Safety Information - Advantech PCI-6873 Startup Manual

Jumpers and Connectors

CN28 External KB
CN29 KB/MS
CN30
PCI golden finger power (-12 V)
CN31 PCI golden finger
CN32 CD-IN (Customization)
CN33 CF connector
Jumper Setting
CN8 Clear CMOS
Pin Signal
1-2 (default) BAT
2-3
Clear CMOS
1 2 3
CN14 LVDS Power Select
Setting Function
1-2* 3.3 V
2-3
5 V
*: Default
1 2 3
CN19 COM2 Setting
Setting Function
1-2* RS-232
3-4
RS-485
5-6 RS-422
*: Default
1 2 3
1 2 3
Jumpers and Connectors
AT/ATX Selector (CN34)
Setting Function
1-2* AT
None
ATX
*: Default

Software Installation

The CD disc contains a driver installer program that will
guide you through the installation of various device drivers
needed to take full advantage of your CPU card.
Caution
The computer is provided with a battery-powered Real-time
Clock circuit. There is a danger of explosion if the battery is
incorrectly replaced. Replace only with same or equivalent
type recommended by the manufacturer. Discard used bat-
teries according to manufacturer's instructions.

Safety Information

This device complies with the requirements in Part 15 of
the FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, includ-
ing interference that may cause undesired operation.
PCI-6873 Startup Manual 3