Nexcom EBC 358 User Manual page 54

Chapter 3: BIOS Setup
Network Stack Configuration
This section is used to configure the network stack.
Aptio Setup - AMI
Advanced
Network Stack [Disabled]
Version 2.22.1282 Copyright (C) 2021 AMI
Network Stack
Enables or disables the network stack. When Enabled is selected, more
configuration options become available.
Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved.
Network Stack
Enable/Disable UEFI network
stack
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Network Stack
Enables or disables UEFI network stack.
Ipv4 PXE Support
Enables or disables IPv4 PXE boot support. If disabled, IPv4 PXE boot option
will not be created.
Ipv4 HTTP Support
Enables or disables IPv4 HTTP support.
42
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Advanced
Network Stack [Enable]
IPv4 PXE Support [Disabled]
IPv4 HTTP Support [Disabled]
IPv6 PXE Support [Disabled]
IPv6 HTTP Support [Disabled]
PXE boot wait time 0
Media detect count 1
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Enable/Disable UEFI Network
Stack
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
EBC 358 User Manual