Overview Of The Device - Kärcher HDS 1000 De Weed Manual

● Do not touch any hot parts such as the muffler, cylin-
der or cooling fins.
● Never bring your hands and feet close to rotating
parts.
● Never operate the device in confined spaces.
● Do not use unsuitable fuels as they can be danger-
ous.
General safety instructions
The following safety instructions apply to the device:
● Observe the respectively applicable national regula-
tions for liquid jet cleaners.
● Observe the respectively applicable national acci-
dent prevention regulations. Liquid jet cleaners must
be tested regularly and the results of the test record-
ed in writing.
● Note that the heating system in the device is classi-
fied as a furnace. Furnaces must be inspected reg-
ularly according to the applicable national
regulations.
● No modifications may be made to the device or ac-
cessories.
High-pressure hose
The following safety instructions apply to the high-pres-
sure hose:
● Use only original high-pressure hoses.
● The high-pressure hose and the spray unit must be
suitable for use at the maximum operating pressure
specified in the technical data.
● Avoid contact with aggressive chemicals.
● Inspect the high-pressure hose daily.
Do not continue using kinked hoses. Do not contin-
ue using the high-pressure hose if the outer wire
mesh layer is visible.
● Do not continue using a high-pressure hose with a
damaged thread.
● Lay the high-pressure hose so that it cannot be driv-
en over or presents a tripping hazard to persons.
● A hose that has been driven over, kinked or subject-
ed to impacts may no longer be used, even if no
damage is visible.
● Store the high-pressure hose in a manner avoiding
mechanical stresses on the hose.

Overview of the device

Description of the device
Illustration A
High-pressure nozzle EASY!Lock (power nozzle
1
048), high-pressure nozzle EASY!Lock (power noz-
zle 032) for weed removal (additionally in scope of
delivery)
EASY!Lock spray lance
2
Pressure/quantity regulation
3
EASY!Force high-pressure gun
4
Safety latch of the high-pressure gun
5
Trigger
6
Safety lever
7
EASY!Lock high-pressure hose
8
Oil drain plug (pump)
9
Fuel tank
10
16
Battery
11
Fuel pump with fuel filter
12
Burner blower
13
Electric starter
14
Manual starter
15
Fuel tank
16
Weed removal electrical box
17
Type plate
18
Water connection with sieve
19
EASY!Lock high-pressure connection
20
Oil filler
21
Pressure gauge
22
Pressure switch
23
Safety valve
24
Pressure tank
25
Burner cover
26
Burner sight glass
27
Nozzle holder
28
Booster heater
29
Solenoid valve
30
Electrical box
31
Oil sight glass
32
High-pressure pump
33
Oil dipstick (motor)
34
Oil drain plug (motor)
35
Detergent suction hose with filter
36
Sieve in the water shortage safeguard
37
Water shortage safeguard
38
Float container
39
Softener tank (DGT)
40
Illustration B
Liquid softener indicator light
1
Fuel indicator light
2
Power switch
3
Illustration C
Detergent dosing valve
1
Illustration D
"Ignition on" indicator light
1
Key switch for electric starter
2
English
Control panel