Table of Contents
Advertisement
SELECTSOURCE
SSIP
Command
VOLUME
GETVOLUME
VOLUMEUP
VOLUMEDOWN
SETEQMODE
GETEQMODE
GETMUTE
SETMUTE
SETBALANCE
GETBALANCE
Select source.
Set static IP,
Default Gateway
and SubnetMask
addresses (seperate
addresses with "-"
character)
AUDIO COMMANDS
Description
Set volume level.
Volume level information.
Inrease Volume Level
by 1 step (Until max
volume)
Decrease Volume Level
by 1 step
Set equalizer mode.
Get equalizer mode
Get mute status.
Toggle mute status.
Set balance value.
Get balance value.
integer n (7 = HDMI1, 8
= HDMI2,9 = HDMI3, 10
= HDMI4, 19 = DP, 20 =
OPS, 26 = TYPE C )
string ( ex: 192.168.0.15-
10.0.90.5-255.255.255.0)
Parameter
integer n (0 ≤ n ≤ 100)
no parameter
no parameter
no parameter
string n (Standart, Music,
News, Theater, Game,
Custom)
no parameter
no parameter
no parameter
integer n (-50 <= n <=
50)
no parameter
#*Select external source: ...
#IP address setting Succesfull
Return
#*set volume to n
#*volume level is ...
#*volume LEVEL is
increased to ...
or
#*Volume level is at
max value. You can not
increase volume level
further. Confirmed max
volume level is ...
#*volume LEVEL is
decreased to ..
or
#*Volume level is at
min value. You can not
decrease volume level
further
#*setEQMode() set to n
or
#*The above parameter
should be one of
Standard, Music, News,
Theater, Game, Custom.
#*the equalizer mode is n
Note: Above n is one of
Standart, Music, News,
Theater, Game, Custom
#*MUTE OFF
or
#*MUTE ON
#*MUTE OFF
or
#*MUTE ON
#*set balance level to n
or
#*invalid balance level
entered
#*balance level is ...
28
Advertisement
Table of Contents
